Sika AnchorFix®-1
Fast-Curing Anchoring Adhesive
A two-component, polyester-based anchoring adhesive that is free of solvents and styrene.
Advantages
- Fast curing
- Can be applied using standard dispensing guns
- Suitable for use at low temperatures
Product Details
Used as a fast-curing anchoring adhesive for the following applications:
- Rebar and starter bar anchoring
- Threaded rods
- Bolts and special fixing systems
- Concrete substrates
- Hollow or solid brick
- Hard natural stone*
- Hard rock*
* Before any application, the compatibility of Sika AnchorFix®-1 with the substrate should be tested in a trial area to ensure the required bond strength and to prevent staining or discoloration. This is recommended because natural stone and rock surfaces can vary significantly in strength, composition, and porosity.
ADVANTAGES- Fast curing.
- Can be applied using standard dispensing guns.
- Suitable for low-temperature applications.
- High load-bearing capacity.
- ETA approved.
- Non-sag, even in overhead applications.
- Styrene-free.
- Low odour.
- Low material waste.
150 ml Standard Cartridge
- 20 cartridges / box
- 75 boxes / pallet
300 ml Standard Cartridge
- 12 cartridges / box
- 75 boxes / pallet
550 ml Standard Cartridge
- 12 cartridges / box
- 50 boxes / pallet
Standard Version
- Component A: White
- Component B: Black
- Mixed A+B: Light Grey
Stone Colour Version
- Component A: White
- Component B: Salmon
- Mixed A+B: Beige
Frequently Asked Questions
What is Sika AnchorFix®-1?
Sika AnchorFix®-1 is a professional product in the Repair and Reinforcement category. Contact ARGESAN A.Ş. for technical use, stock and quotation details.
Where can Sika AnchorFix®-1 be used?
The application area depends on product specifications, substrate and site conditions. The technical data sheet and ARGESAN technical support should be evaluated together.
Can I request a quotation for Sika AnchorFix®-1?
Yes. You can request stock, price, delivery and application support details from ARGESAN A.Ş.