Skip to content
Special Delivery to the Site ARGESAN A.Ş. Assurance
0242 513 93 70
ARGESAN AS
ODE Opal
ODE SKU: ARG00334 ARGESAN A.Ş.

ODE Opal

These are waterproofing membranes produced from APP-modified bitumen, reinforced with glass fiber mat or polyester felt, and suitable for application in temperate climate conditions.

Surface Preparation:

The surface on which the waterproofing membrane will be applied must have a completed slope concrete layer, be finished with a wooden float, and be free from oil, dirt, and dust. If necessary, the surface should be cleaned using pressurized water. All junctions between vertical and horizontal surfaces should be chamfered (at a 45-degree angle with dimensions of 8 × 8 cm).

Product Details

  • Available with glass fiber mat or polyester felt reinforcement options
  • Cold bending resistance up to -5°C
  • Tensile strength of 600/400 N/50 mm (polyester felt reinforced)
  • Optional UV-resistant colored mineral-coated top surface
  • Easy application in high ambient temperatures
  • High UV resistance
  • Long service life and delayed aging thanks to APP modifiers
  • Application Instructions

    Apply ODE Bitumen Emulsion Primer to the surface according to the prescribed application method. Before starting the membrane installation, allow the primer to dry for 1 day at 15–20°C and 2 days in colder weather conditions. Application should not be carried out at temperatures below +5°C or during rainy weather.

    The ODE OPAL waterproofing membrane should be unrolled perpendicular to the roof slope on terraces or pitched roofs, starting from the lowest point. The membrane should overlap 15 cm longitudinally and 10 cm transversely. It should be bonded either only at the joints, as specified in the application details, or fully adhered using a torch flame.

    On surfaces where torch application is not possible, or where protection against wind loads is required, the membrane should be mechanically fixed. After the first layer has been applied across the entire surface with staggered transverse joints, the second layer should also be installed in a staggered arrangement so that its longitudinal and transverse joints are centered over those of the first layer.

  • Frequently Asked Questions

    What is ODE Opal?

    ODE Opal is a professional product in the ODE category. Contact ARGESAN A.Ş. for technical use, stock and quotation details.

    Where can ODE Opal be used?

    The application area depends on product specifications, substrate and site conditions. The technical data sheet and ARGESAN technical support should be evaluated together.

    Can I request a quotation for ODE Opal?

    Yes. You can request stock, price, delivery and application support details from ARGESAN A.Ş.

    Similar Solutions

    My Offer Cart

    Your Cart is Empty

    You can select the products you wish to receive a quote for from our catalog.

    Go to Quote Form
    ARGESAN Support AI + live support

    How can we help you?

    Please enter your name so we can address you. The chat cannot be started without your name.

    Fast Support Contact Us on WhatsApp